Created by Professional Golfer Jaacob Bowden, PGA and club design industry icon Tom Wishon, Sterling Irons® are the world’s most technologically advanced set of single length irons the world has ever seen.
Jaacob Bowden has been playing and selling single length iron sets since 2007. As such, he understood and experienced the benefits of the single length concept (he shot his first tournament round in the 60s with single length irons). He found that they are inherently easier to play. One single length iron meant one single swing for each club. You end up gaining a ton of consistency, hitting the ball closer to the target, and shooting lower scores.
However, Jaacob also knew there were a variety of historic problems within the single length market. Some of the primary issues were that not all the manufacturers had USGA-conforming grooves and there were limited custom fitting options. Distance gaps sometimes bunched, and there were trajectory problems with all the manufacturers in that the low-lofted clubs flew too low and high-lofted clubs flew too high
In October 2013, Jaacob went to Durango, Colorado to visit his friend Tom Wishon. Tom is a 40-year plus veteran of the golf equipment industry specializing in club head design, shaft performance analysis, and club fitting research and development. Jaacob asked Tom if they could come up with a cool-looking single length iron design that would retain all the inherent benefits of single length sets while solving all the problems.
After 2 years and 6 months of research, human and robot testing, and development, the result of their hard work is Sterling Irons®.
Discover an easier game with Sterling Irons® – custom single length irons golf clubs created by Tom Wishon & Jaacob Bowden.
Sterling Irons® Single Length Irons
- The High COR #4,5, 6, and 7 irons offer proper distance for the low loft clubs at the shorter single length. These heads features a hi-cor face welded to a Carbon steel frame. These heads are the closest to forged feel you can get
- Conventional cast carbon steel in the #8 to gap wedge with 5* loft increments blend with the high COR design of the low loft clubheads to offer proper distance gaps and proper distance with the high loft clubs.
Each Club is hand assembled by our ICG Certified Club Builder. All lofts and lies are checked and adjusted to spec. Each shaft is checked and matched for flex and properly aligned in head to give the best performance / forgiveness possible.
Sterling Irons® Single Length Irons are available in both left and right hand models.